brokeass4runner
02-27-2008, 11:08 PM
So for a small sample of tech, here is a comparison of the "stock" suspension setup versus the "droop" setup on a TCS Edge chassis.
Heres the stock setup immediately after I finished the build with no run time and very minimal suspension cycling.
http://webwheeling.com/gallery/d/47658-1/AX-10+Build+6.JPG
Here is the TCS droop setup with a medium internal spring and stock spacer inside the shock. The first picture shows the stance immediately after I finished the new setup. The second picture shows the taller ride height after the addition of a 1/4" spacer outside the shock.
http://webwheeling.com/gallery/d/47664-1/AX-10+Build+8.JPG
http://webwheeling.com/gallery/d/47679-1/AX-10+Build+13.JPG
Right now it sits at a çunt hair under 2 1/4 inches at the belly. I don't remember the measurement for the stock setup.
http://webwheeling.com/gallery/d/47676-1/AX-10+Build+12.JPG
Heres the stock setup immediately after I finished the build with no run time and very minimal suspension cycling.
http://webwheeling.com/gallery/d/47658-1/AX-10+Build+6.JPG
Here is the TCS droop setup with a medium internal spring and stock spacer inside the shock. The first picture shows the stance immediately after I finished the new setup. The second picture shows the taller ride height after the addition of a 1/4" spacer outside the shock.
http://webwheeling.com/gallery/d/47664-1/AX-10+Build+8.JPG
http://webwheeling.com/gallery/d/47679-1/AX-10+Build+13.JPG
Right now it sits at a çunt hair under 2 1/4 inches at the belly. I don't remember the measurement for the stock setup.
http://webwheeling.com/gallery/d/47676-1/AX-10+Build+12.JPG