Rig wont run.....

[brokeass4runner]

Ran it two days ago and it did fine.

Plugged the battery in today. It turned on like it normally does. Turned the radio on and it doesnt seem to recognize it. If I plug and unplug the battery connection on the receiver, the light on the receiver kinda of sputters and the wheels flutter.

Is my receiver jacked? Does this sound like somethings loose in the receiver?

I have no control what so ever. No steering or throttle.

[Silas]

Did you bind your radio to your receiver agian?

I have heard of the CC MM creating binding issues with the SR3100 receiver... KvilleKrawler may have some insight on this...

[upnover]

First try to rebind esc and radio next if you have another radio and receiver try it. Good Luck...

[brokeass4runner]

Did you bind your radio to your receiver agian?

I have heard of the CC MM creating binding issues with the SR3100 receiver... KvilleKrawler may have some insight on this...

Thats what I had to do. Got it running but it messed up all my throttle and steering controls. Its doing what SRXs was doing but opposite.

Crawls forwards and punches it backwards. Fawking electronics.

[KvilleKrawler]

Yeah, I had this same kind of issue for about two weeks with my dsm2 receiver. About every two days I would have to re-bind the receiver and reset all my throttle and steering settings. Then all of a sudden it quit doing it and kept the binding. I haven't had any problems since.

For the throttle issue I deleted my saved ax10 MM config file, reset the defaults and then changed all my settings again and saved it. Then I loaded the new saved config and then choose the update option to send that config to the MM. That resolved the issue for me.

Since this happend I keep one binding plug with me just in case it wants to start acting up again...

If your still having the problem on Sunday (if your going to bull hole) we can take a look at it then...

[brokeass4runner]

Yeah, I had this same kind of issue for about two weeks with my dsm2 receiver. About every two days I would have to re-bind the receiver and reset all my throttle and steering settings. Then all of a sudden it quit doing it and kept the binding. I haven't had any problems since.

For the throttle issue I deleted my saved ax10 MM config file, reset the defaults and then changed all my settings again and saved it. Then I loaded the new saved config and then choose the update option to send that config to the MM. That resolved the issue for me.

Since this happend I keep one binding plug with me just in case it wants to start acting up again...

If your still having the problem on Sunday (if your going to bull hole) we can take a look at it then...


Rebinding ended up fixing it. Just had to reset my all my settings. I'll be bringing my bind plug on Sun too just in case.