Thanks T1E !!

[4xAdict]

It Lives !!
http://img22.imageshack.us/img22/8401/myberg021.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-04-26
http://img16.imageshack.us/img16/2063/myberg022.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-04-26
http://img9.imageshack.us/img9/9320/myberg023.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-04-26

When it comes to things mechanical I can generaly figure about anything out , but electricity is a whole nother can of worms . Worked the first time and I didn`t let the smoke out of anything , I`m very happy with the results too. Took it out for the maiden voyage today and I`m impressed , you guys nailed this chassis . I love it . It is an exersise in space management too , but I managed to pack everything onto the Rockshow skid. I tried to keep accessability in mind too, remove the four lower link screws and three plugs and the whole thing drops out the bottom .

http://img12.imageshack.us/img12/6214/myberg017.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with Digimax A402 (http://profile.imageshack.us/camerabuy.php?model=Digimax+A402&make=Samsung+Techwin+co.%2C+Ltd) at 2009-04-26
http://img22.imageshack.us/img22/3543/myberg015.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with Digimax A402 (http://profile.imageshack.us/camerabuy.php?model=Digimax+A402&make=Samsung+Techwin+co.%2C+Ltd) at 2009-04-26
http://img12.imageshack.us/img12/1434/myberg007.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with Digimax A402 (http://profile.imageshack.us/camerabuy.php?model=Digimax+A402&make=Samsung+Techwin+co.%2C+Ltd) at 2009-04-26

Not completely finished yet but enough to start learning how to drive this thing , never driven an MOA before today . Some quick specs .

Electronics
FXR , castel BEC (under the servo) , SR3520 Micro Rx , HiTec 7955TG and HS-56HB for dig , dig switches from Newark.com

Bergs w/Avid bearings and Axial stubs, Fubar lockouts , CDW steering , Epic 45T`s with 12 teeth .

And a little bit of machine work here and there . Action pics latter , heres a teaser .
http://img9.imageshack.us/img9/5621/myberg066.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-04-26

[Cycleeric]

Looks great

[4xAdict]

Thanks more pics and info here .

http://www.rccrawler.com/forum/showthread.php?t=175103

[highrock-dam-crawler]

looks good i like the way u have the dig switches down low

[CRSMacgyver]

That looks sweet!

[Ruthless Racer]

WOW, Thats a sweet set-up :thumb:

[4xAdict]

Thanks alot guys , glad you all like it . Now I have two weeks to learn to drive it , LOL .

Here is a pic of just the switches and servo mounted .
http://img16.imageshack.us/img16/5453/myberg019.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with Digimax A402 (http://profile.imageshack.us/camerabuy.php?model=Digimax+A402&make=Samsung+Techwin+co.%2C+Ltd) at 2009-04-26

[1rcbking]

a contender!

[4xAdict]

a contender!


I think the rig is , not so sure about the driver though :) .

[rockshow]

Very nice! I like the setup with the dig....

[Nut Buster]

How come we aint crawlin where you took those pics at?

[Brackett]

Can't wait to see it in action!!!!!

[Redrocks]

I like, wish I had looked here an hour ago. I just got done with mine, I have a castle speed control and my dig is not done as small as yours so I have guts coming up to the window. I just ran mine up a flat rock hill that I use to test the ax10 and it was a whole new world for sure. Not to mention I can now set it on its side and it wont fall all the way over. Did you make your BTA steering or can I get one of those somewhere. I think I have those exact knuckles on the ax10 still. Also the servo mount, custom or can I get one of those to. Again good job wish I could make it to the next comp to really test this baby out cause I have no real rocks within 45 min of me.

[WV4WD]

Very nice set up, very clean. Im looking forward to getting my T1E chassis.:beer:

[4xAdict]

How come we aint crawlin where you took those pics at?

It would be a great place for a comp, almost 2 full acres of exposed rock ... but there is a parking issue . It`s private property that we just got access too recently , we are still looking for a suitable spot in this part of the state.

Redrocks , The steering is from Crawler Design Works , he made up a limited number of basic kits and is out now but rumor is there is a new version coming that will work with some clocking . The one I have will not work with any clocking . I got it here http://www.rccrawler.com/forum/showthread.php?t=168137
It wouldn`t be hard to make .

[Redrocks]

Thanks!

[4xAdict]

All done and ready for tomarrow . Just missing some stickers :) .

http://img7.imageshack.us/img7/7006/myberg095.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-05-08
http://img7.imageshack.us/img7/5389/myberg096.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-05-08
http://img7.imageshack.us/img7/4747/myberg094.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-05-08
http://img17.imageshack.us/img17/8374/myberg089.jpg
By fourbyaddict (http://profile.imageshack.us/user/fourbyaddict), shot with NIKON D70s (http://profile.imageshack.us/camerabuy.php?model=NIKON+D70s&make=NIKON+CORPORATION) at 2009-05-08

[Silas]

That looks hot!!! very nice...

[4xAdict]

Thanks alot . I screwed up the carbon on the deck , did it backwards but it looks good enough till I can redo it .

[renoirbud]

That is a good looking steering setup. I will have to copy it.

[Silas]

That is a good looking steering setup. I will have to copy it.


Let me know when you have it CAD'd out.... I will personally cut that out for you! ;)

[Shocker]

Great looking Rockshow !!!

One of the nicest ;)

[4xAdict]

Thanks alot . First time I`ve ever taken a build of any kind quite this far . Now I just gotta try not to make the rig look bad today on the courses :) . Got very little wheel time with the past six days of rain here :( , and I`ve been off work all week too .

[1rcbking]

You made the rig look real good today. :D

[CRSMacgyver]

Very nice job today. Rig looked really good! Let me know when you sketch out that steering. I will get the rest taken care of.

[4xAdict]

Thanks guys . Truck worked well yesterday ,I made some dumb mistakes that were costly points wise but learned some things and had fun . I`ll try to get the measurments this week .

[highrock-dam-crawler]

u looked great yesterday with the new truck.
i want one of those steering setups when they get cut