mamba maxx set-up

[srx]

how do i want to set up my mamba in the ax10, right now its all at factory setting except i changed it to brushed for my 55t v10 and lipo cut off at 6. for my 7.2. how do i want the drag, forward, reverse , basicly everything set. thanks for any help

[brokeass4runner]

I've got mine set pretty high at around 90% on the drag brake. I love how you can set the throttle response the curve. I'd say thats personal preference. I've got it set so that a good bit of my trigger is crawl and the last little bit punches it. IMO you want enough reverse power to get it too jump back if you start to go over. I've only tuned it once. I am going to mess with it a bit more when I get the chance.

[srx]

i ran it today at 50 drag and it wasnt enough, i also was gonna try the curve at 60 but didnt.

[Scarface]

Ok i peaked the curve for a longer low speed then a quick jump to full power, as did BA4R. You want no reverse lockout, 90% reverse power, dont mess with the timing or the other weird things like arm time and stuff, you wont notice much difference, I ran my drag brake at 50% then bumped it to 90% now i am going back down to 60%, oh brakepower is 90%

hope this helps

[srx]

i will try it:beer: